Does Your Car Need A New Windshield Replaced Properly?
The windshield at the front of your car is an essential aspect of your car’s safety and accounts for up to 30% of the car’s construction. In the event of a slight impact in speed, the driver’s or front passenger’s airbags are designed to deploy within a second and remove from the windshield, reassuring to the occupants. If the windshield is not installed with the right methods and the right products, then there is a chance that the force of the airbag will release the windshield from its diaphragm, rendering the airbag unusable and causing unquantifiable injuries to the occupants.
A reputable window replacement company can ask you relevant questions to find out what type of windshield you have. Options include, but are not limited to, clear glass, tinted glass, sunscreen, acoustic glass, heated screen, heated wiper area only, top tinted, rain sensor, light sensor, defogger sensor, dimming interior mirror, lane warning departure. , head display. The glass we use for your car is OEM glass, meets all standards and is exactly the same as when your car came from the factory. Visit windscreen replacement centurion for more information.
When a windshield technician comes to your home, he should first check that the windshield he is wearing is an immediate replacement as needed and that he has all the necessary clips and trim strips. . .
After checking the compatibility of the replacement windshield, the technician should check the customer’s car for scratches and visible defects, instructing the customer before starting.
All sensitive areas of the car must have a suitable cloth or mask. this includes, but is not limited to, seats, hoods, fenders and A-pillars. All inner and outer trim strips, clips and fittings will be removed to give the outer edge of the old windscreen a smooth look.
Windshield technicians differ in their windshield removal methods, some choosing the “fastknife” method and others the “cheesewire” method, as a combination of both. Regardless of the method chosen, an experienced technician should be able to remove an old / damaged windshield with little extra damage.
After removing and safely removing the old windshield, the technician must cut the polyurethane bond that was previously placed on the windshield. This is the glue that holds your front seat in place. It is cut and approximately 1 mm thick with a hole. All scratches after removing the windshield or cutting the polyurethane molding are treated with a special primer or activator. All membrane stains will be lubricated and also treated with a primer or activator depending on the type of polyurethane product used.
The new windshield must be visible to look for traces and defects again, then the black stripe, blackout stripe, around the edge must be thoroughly cleaned with a silicone removal compound to remove all signs of the manufacturing process. The technician should wear nitrile gloves at this time to remove fingerprints in the area being cleaned, as any grease, wet or dirt will prevent the windshield from adhering well to the windshield, resulting in leaks or noise in the wind or as already mentioned. the effectiveness of the airbag when the vehicle is involved in an accident. A primer was now applied as an activator to the fully cleaned blackout strip.
Now that the new windshield and diaphragm have been prepared with the right techniques and products, a new polyurethane or adhesive can be used. this can be done with a hand or electric spray gun.
Using a V-shaped nozzle, a uniform bead with a thickness of approx. 10 mm is applied to the membrane or to the windshield. Screws the polyurethane to the right and of the same length. Butt joints are used to prevent air holes or holes in the adhesive from causing leaks. The technician then places the windshield in place, carefully, in the hole to ensure that the windshield is firmly seated in the diaphragm and that it is immediately glued.
After checking that the windscreen is set in the correct place and fitted correctly, all decorative clips and fittings can be refitted and all leaks and masking removed.
The new windshield is already installed using the correct methods and the products and technician must check that the bonnet is properly closed, the wiper is in the correct place and that the washers and rain sensor are working.
All that remains now is for the technician to return the keys to the driver, inspect the driver’s car and inform the driver of the safe driving time.